Followers

Friday 24 October 2014

Delicate Asters Book

Hello Friends,

Today I am sharing with you a pretty little 6"x 6" Laser Cut Grey Board Book that came from That Craft Place Ltd



Lisa has been turning out some really lovely pieces from her laser cut machine and welcomes any orders/requests for items you would like cut.  I decided to use one of her 6"x 6" grey board books which came with a laser cut flower that looked a little like an aster.


I also used these other pieces that she sells in packets of two's, three's or a number that you require.


I put the cut pieces together with my Heartfelt Creations Delicate Asters set of stamps, dies and papers and set about creating a little book with secret pockets and tags.

I started by covering the front, back and inside pieces of the book with cut down papers and stamped on the papers in different areas.

I used the papers to cut out some of the flowers and built them up to become the delicate asters, I also cut out some of the little flowers and stuck those to the stamped blossom tree on the inside of the back cover.





I coloured the little grey board pieces with distress inks and used a mask cut by Lisa to put the dots on the umbrella.  I layered the flowers up on top of the leaves that I cut out using the die.


I then started cutting out pages to put in the book from the 12"x 12" paper pad and used some of the sentiment panels to make little pockets and placed tags in them.


I felt that the back cover deserved to be as pretty as the rest of the book so it has a 3D butterfly that I stamped and cut out and I used some lovely quote stamps through the book.

In the picture fourth from the top you can see a vellum page with a butterfly on it.  These I believe came from a Kanban kit and I put one vellum page between each heartfelt creation page just to add a different look and texture to the book.

This book will be going on show in That Craft Place shop for customers to look at and to give them inspiration for the laser cut books.

Thank you for dropping in today and taking a look at this pretty little book, I hope it has given you some inspiration for a project.  Please do leave me a comment to let me know you dropped by and what you think about the book.  If you like what you see and would like to join me on my crafting journey then please feel free to follow me.

Thanks
Ria

Thursday 9 October 2014

Christmas Stocking

Hello Blog Friends,

Welcome to my blog, I hope you are all well having fun and not letting this winter weather get to you too much.

As we are now starting to feel more like winter I thought it would be safe to share with you a winter make that I have done for That Craft Place


I have to apologise as I forgot to take a photograph of this in it's naked state.  It has been laser cut by Lisa out of MDF and comes in two pieces, the red part and the white part that you can see at the top of the stocking and they both have a hole cut in the top right hand corner.

I started by covering both pieces back and front with White Gesso and dried using my heat tool. Once dry I covered both pieces with Maimeri Light Modelling Paste as well as attaching some screwed up Tissue paper in areas on the stocking to give it extra depth.

The next stage was the hardest, waiting for it to dry!  I am not the most patient of people and have a habit of sticking my finger into things to see if they are dry yet.

Once I had given the modelling paste the correct time to dry I started painting the red area.  I used Paper Artsy Fresco Finish Chalk Acrylics in London Bus red and in a few areas I added in just a tiny amount of black to again give the stocking depth and shading.  I gave the front two coats of paint using a paint brush and the back two coats using a piece of Cut and Dry Foam.

I used White Acrylic Paint for the top piece and once this was dry I applied two coats of Crawford and Blacks Glitter Paint.

The Snow Woman was laser cut from Grey Board by Lisa and comes in a packet as a MR & Mrs.  I covered the three pieces with white gesse and then when dry I went over the body with the glitter paint.  For the hat I used a Glitter Glue that I found in my stash and finished this little lady with other items from my stash.

The Snowflakes are laser cut from MDF and were given the same treatment of white gesso and glitter paint.

I wanted to have some wrapped presents coming out of the top of the stocking and spent a night thinking of how this could be achieved (instead of sleeping, which I don't do much of anyway).
I decided to make two small boxes and filled the inside of these with tissue paper to give them more strength.  I then wrapped them in tissue paper and created little tags for them.  I then put two pieces of Centura Pearl Card together for strength and cut a slit in the side of each box.  I covered the pieces of card with glue and pushed them into the slit I had made and left enough card sticking out so that it could be glued between the red stocking and white top pieces of MDF.

I finished the whole thing off with some Christmas bits from my stash and some Polar Flower Soft. The Merry Christmas Sign was from one of the stamps I have in my Christmas Crafting Box.

I don't know how any of you store your Christmas Crafting Stash but I found it didn't belong in with my everyday stash so I decorated a box and anything that is to do with Christmas is put in that box and then put well out of the way once it is no longer needed.  For me that works but I would love to hear from you about how you store your Christmas crafting stuff.

Thanks once again for dropping in on my blog and taking a look at what I have made and how it was done.  I do hope a Christmas Project has not got you stressed or worrying about how much you have to do.

Please do leave me a comment to let me know you have dropped by and please feel free to follow me on my crafting journey if you like what you see.

TTFN

Ria